pH value: Recommended sets
Our production has a modular character. Various combinations of meters and other components successfully cover a wide range of applications in industry, water management, and many other areas. Upon request, we will be happy to offer you a suitable configuration tailored for your application. If you want to better orient yourself in the products of our company, some typical sets proven in practice follow. However, this is far from a complete list of all possible combinations.
Measurement of pH in neutralization tanks
A set with glass pH electrode in a robust rod-style probe with automatic sensor cleaning. Measurement assumed in an open tank, in parentheses the variant for two measurement locations. (Note: Glass sensors are not suitable for measurements in the presence of fluoride ions.)
- 1x MFD88 analyzer configured for 1x(2x) pH measurement
- For outdoor installation 1x MUT13V clamp with protective cover
- 1x(2x) submersible probe SPO41MEK with automatic cleaning
- 1x(2x) pH sensor 01-30GK
- 1x(2x) temperature sensor TTK21PS (if temperature correction is required)
- 1x(2x) MUT11B clamp (if needed)
pH measurement for water treatment plants - raw water, lime dosing, flocculant dosing
A set with glass pH electrode, with automatic cleaning of the sensor. Supply of the water sample through a hose, the variant for two measured locations is given in brackets.
pH measurement for water treatment plants - treated water
A set with glass pH electrode in a flow-through probe, or in a cost-saving flow-through unit. Supply of water sample through a hose, no automatic cleaning of the sensor. The variant for two measured locations is given in parentheses.
Measurement of pH (and temperature) for WWTP - raw water
Classic set with a glass pH electrode in a rod-style probe, for measurements in a tank or channel with an open surface. The spherical cover over the sensor helps self-cleaning by flowing water (mechanical cleaning is not recommended due to the usual presence of fibrous substances).
Measurement of pH (and temperature) for WWTP - raw water (lightweight version)
A cost-saving set with a glass pH electrode in a suspended miniature probe. The saving of space and price is redeemed by the lower comfort of maintenance.
Measurement of pH and temperature for fish farming technologies
A cost-saving set with glass pH electrodes in suspended miniature probes. A single device supports up to 12 measurement points (more than 4 outputs only available via the MODBUS interface).
ORP and pH measurement for water treatment plants
Combination of both usual measurements in a single device. The variant with automatic sensor cleaning is suitable for raw water, or for other places in the technology where lime, flocculant, etc. are dispensed.
Measurement of pH, ORP and chlorine for swimming pools (with possibility of direct dosage control)
Measurement of a trio of common pool water parameters in a single compact block with water sample supplied through a tube. The dosage of chemicals may also be directly controlled, usually to achieve the correct pH and chlorine values. The option listed in parentheses serves two pools within the same building, but is limited to a maximum of 4 outputs by a 4-20 mA current loop and a maximum of 4 relays.
Measurement of pH and chlorine for swimming pools (with possibility of direct dosage control)
Measurement of the two most important pool water parameters in a single compact block with water sample supplied through a tube. The dosage of chemicals may also be directly controlled. The option listed in parentheses serves two pools within the same building, but is limited to a maximum of 4 outputs by a 4-20 mA current loop and a maximum of 4 relays.